PO Box 1621 Sioux Falls SD 57101 US
heidelbauer custom duck calls
vintage custom duck calls



Pricing & Ordering Products. The Mallard Toller Duck Call - $360.00. Personalized or Limited Edition, available in Birdseye Maple. Curly (Tigerstripe) Maple or Maple Burl. Includes Lanyard and standard...

our calls

pricing and ordering custom duck calls
heidelbauer custom duck calls
custom duck calls



A family craft that has been passed down by generations and has spanned over 60 years.  Our story began with a love of hunting and has continued today to provide hunters a high end call that can be treasured for years to come.

The Mallard Toller is a truly hand-crafted duck call. Each and every part is hand made by myself as taught to me by my grandfather, mostly using tools that he made. My grandfather, Frank Heidelbauer, began designing his duck call in the late...

The Mallard Toller Duck Call

Our trademark call is the Mallard Toller duck call. Our duck call has two primary distinguishing attributes. Paramount is the call's exceptional tolerance. By this I mean that you can "lean on it" with all the breath pressure you can build and the call's sound will not break, squeal, or stop up. Here on the prairies of South Dakota, we often have to hunt in very high winds, so we need a call that is capable of great tolerance. Something that we can get tremendous volume out of and our call has it. However, we also need a call that will talk softly to get the ducks down into the decoys. My call will do all of this, and does it with great fidelity. There's a fine mallard rasp to it!

Each and every piece is hand-crafted by me personally. I do NOT order any parts pre-made, or have any parts injection molded. The sounding device, or as some call it, the insert, is made of five separate pieces. The anvil or sounding board, the reed, the reed wedge, nylon tubing to hold these pieces together, and the "horn" that screws into the barrel. The anvil or sounding board, as well as the reed wedge are made from clear acrylic rod. My grandfather hand built machines that I use to mill these pieces into their initial shape. These machines get attached to band saws, drill presses, and lathes to create the individual pieces. There is a great deal of sanding and handwork to get the pieces to their final shape. The reed is a Mylar sheet plastic with a very unique taper. Creating this piece is about the only process we do not divulge. The nylon tubing is cut to length on a band saw, then filed down, and sanded to hold the anvil, reed, and wedge. These four are press fit very tightly into the "horn" which is crafted out of PVC pipe nipple. My grandfather choose this because of the tapered thread that allow the sounding device to screw into the barrel easily at first, but then snugs up tightly as it hits the taper. We have never had a report of a lost sounding device in 58 years. The wood barrels are made out of three types of Maple. Birdseye Maple was my grandfather's trademark wood, and I have added Curly or Tiger Stripe Maple, and Maple Burl. The first two are blond color, and the burl is a darker color.

The wood, which I get mostly from the Upper Peninsula in Michigan, is cut to length, then to a width of 2inch by 2inch. With three titanium taps, each increasing in size, I thread the interior of the maple barrels. The maple barrels is turned on the lathe and sanded. It is then turned at the lathe's highest speed while a bit of blue denim with a special piece of plastic is held on the ends of the call, friction burning the ends of the maple to the black color. This welds together the end grain of the barrel and makes it very strong at its ends. This is especially important at the end where there is a spreading, screw-in sounding device. Then, as a decorative touch, I also burn a couple of lines around the lanyard groove.

The barrels are then ready for finish. One coat of finish is hand brushed on the inside of the barrel, allowed to dry, sanded, and receives a second coat. Each barrel is placed onto its own individual mandrel. The mandrel and barrel as one are individually chucked into the lathe. Each barrel receives three coats of finish with sanding in between. After three coats the barrels are ready for the personalized or limited edition inscription. A fourth and final coat of finish is sprayed over the inscription.

Final assembly consists of making sure each sounding device properly seats into the threaded portion of the barrel. The Mallard Toller is then complete and ready for shipment.

Several Limited Edition call numbers are reserved and purchased by the same collector each year. If you wish to reserve a specific number for your collection going forward, please let me know. I have existing Limited Edition, individual and or collection, of calls available for sale.

A Hail Call for Canada Geese And A Hail Call for Blue and Snow Geese

Our goose call is a resonant cavity goose call, or "honker" style goose call. This call is made with the exact same materials and attention to detail as the Mallard Toller. The difference obviously is the shape and size of the anvil or sounding board and the reed. The barrel is also longer for the purpose of easily identifying your calls. Only personalized goose calls are produces at this time.

Limited Edition Calls

A Limited Edition series of 35 calls are made each year, but don't always necessarily sell out. I have many calls available from past years for purchase. All Limited Edition calls are identical to Personalized calls and are made to be used if desired, yet are wonderful collection pieces. Several Limited Edition call numbers are reserved and purchased by the same collector each year. If you wish to reserve a specific number for your collection going forward, please let me know. Discounts may be available for collections. These calls are ready for immediate shipping! A photo of individual calls can be e-mailed if you would like to see a particular call or set.

When ordering future Limited Edition calls you have the option of selecting the wood type for your barrel.

Standard Mallard Toller pricing ($360.00) applies to in-stock Limited Edition Calls even though they may have appreciated in value.

Contact me for a list of available numbers.

"You can't believe how well these stools work until you've enjoyed an entire day on one in the marsh. I've have used and thrown away all the other stools I've ever come across until this one."
- Dr. Robert E. Nelson...

heidelbauer custom duck calls



custom duck calls
marsh stool and custom duck calls